Sunday, June 16, 2013
Berikut ini akan saya share command untuk instalasi Load Balance 2
ADSL Speedy menggunakan RouterBOARD RB450G. Settingan ini saya terapkan
di salah satu Warnet di Tangerang gabung dengan Eksternal Lusca Web
Proxy.
Silahkan copy paste skrip berikut di New Terminal dan sesuaikan IP address serta interface yang Anda gunakan.
 |
| MikroTik RouterBOARD 450G |
/ ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=ether3- lan add address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=ether1-modem1 add address=192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=ether2-modem1 / ip route add dst-address=0.0.0.0/0 gateway=192.168.1.1,192.168.2.1 check-gateway=ping / ip firewall nat add chain=srcnat out-interface=ether1-modem1 actions=masquerade add chain=srcnat out-interface=ether1-modem2 action=masquerade / ip firewall mangle add chain=input in-interface=ether1 -modem1 action=mark-connection new-connections-mark=modem1_cm add chain=input in-interface=ether1-modem1 action=mark-connection new-connections-mark=modem2_cm add chain=output connection-mark=modem1_cm action=mark-routing new-routing-mark=ke_modem1_rm add chain=output connection-mark=modem2_cm action=mark-routing new-routing-mark=ke_modem2_rm / ip route add dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=ke_modem1_rm add dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=ke_modem2_rm
